SAMTECH

HVAC Services

We supply and install state-of-the-art high efficiency residential or commercial Heating, Ventilation and Air Conditioning System.

We have a wide range inverter, reverse cycle and cooling only air conditioners that are more than capable of sufficiently moderating your space’s temperature. Our team has lots of experience and will be more than happy to assist you through the process of choosing and installing a split system air conditioner which suits your living space.

We install different types of Air Conditioners.

SAMTECH

Inverter Split Air Conditioning System

An inverter model is one in which the compressor is charged by a variable speed drive or ‘inverter’, which then permits the compressor to run at a variety of speeds from slow to fast in order to match the output needed.

An inverter split system regulates the space temperature by graduating the speed of the compressor motor, similar to using the accelerator on your car to remain at a continuing speed. The most important distinction between inverter and non-inverter air conditioning units is that the motor of the inverter compressor has a variable speed. A sensor within the inverter adjusts the power according to the temperature within the room, lowering the electrical consumption and preserving energy.

SAMTECH

VRF Air Conditioning System

The factory-trained professionals at SAMTECH are very much qualified in new installations, retrofittings, seasonal maintenances as well as can repair all makes and models of VRF equipment.

For our commercial customers, we provide a more personalized experience with unmatched attention to detail. Along with very low disruption to your facility, we try and accommodate in your busy schedule, keep the job sites well organized, as well as provide clear communication. We always strive to keep your facility perfectly comfortable and more money in your pocket through peak efficiency, reliability, and system longevity. Contact us to get in touch for VRF system services throughout UAE.

Should you retrofit and when and why?

Old HVAC system will become less efficient and would require more frequent repairs, which is why retrofitting is necessary in order to prevent further loss in performance. If your HVAC system is over 10 years old, it may be near the end of its functional life which is why a retrofitting or repair is required in order to allow the unit to continue running in subsequent years.

If your HVAC system is comsuming a lot of energy, indoor air quality is poor along with rising bills, this can also be a reason for an upgrade. When you are considering the cost of a retrofit, please note that replacing an outdated unit may decrease energy costs as well by more than 20%.

Things to consider before retrofitting

Decreasing both the operating and maintenance costs, is the main reason for retrofitting and ultimately improe the current HVAC system. When we increase the energy-saving efficiency, we are mainly reducing the costs involved with respect to operation and maintenance.

You should evaluate beforehand whether to go ahead and upgrade or replace parts of an HVAC system, because these mechanical systems are quite large and are almost at times instegrated with the building's structure. Therefore, the owners and property managers should look to external sources for assistance when determining retrofitting decisions because it could be a complex procedure and also look for guidence while coming up with a retrofit design.

You should evaluate your current HVAC system before determining whether a restrofit will be the best course of action and also identify the bad performing components before implementing a retrofit. You can do a baseline assessment in order to measure the system's performance against desired performance rates. But, for more difficult parts of the HVAC, you may need a specialist engineer.

Another very important thing to consider is the size of the system since it relates to its effectiveness when managing temperature. A smaller unit will use less energy but may not be suitable in regulating tempreture levels for a large area. In order to get this resolved, you may want to go ahead with a larger system which in turn would be more effective in controlling tempreture but it will use more energy. You should always consider the sizes which will be suitable for corresponding areas.

When HVAC service providers calculate the estimate, they would take into account the technical requirements for a system to function depending on the size of the area it's meant to regulate. You may consider contacting the service provider who installed your current system in order to check whether or not they have that information available. If the building where the system is installed has gone through any architectural changes, new estimate would be calculated since the change will affect the system's coverage.

You would also need to consider the operating conditions of the builing at the time of choosing a replacement system or even for the parts. Whenever there's more people occupying a space, the system has to deal with the extra heat. Hence, the compressor which is in the HVAC system must be be suited to the changeability of the HVAC system’s operating conditions. You would also need to install a correct compressor based on the changes in conditions in the affected area.

All third party trademarks (including names, logos and icons) referenced by SAMTECH remain the property of their respective owners. Unless specifically identified as such, SAMTECH’S use of third party trademarks does not indicate any relationship, sponsorship, or endorsement between SAMTECH and the owners of these trademarks. All references by SAMTECH to third party trademarks are to identify the corresponding third party goods and/or services and intended to constitute nominative fair use under applicable trademark laws.


Powered by: ThinkKoncept

WhatsApp Facebook Instagram Twitter YouTube